News

  • 0
  • 0

Global 3D printing metal powder market trend 2025-2029 What is 3D Printing Metal Powder? by Newsinwin-style

The roble had hit a record low after the West imposed sweeping sanctions on Russia for its aggression in Ukraine. Russia's president recently ordered exports of Russian gas to "unfriendly" countries to be settled in robles. The speaker of Russia's upper house of parliament said Moscow was prepared and could shift supplies to markets such as Asia if Europe refused to buy Russian energy.

European countries, which pay mostly in euros, say Russia has no right to reset contracts.  The G7 rejected Russia's demand and urged companies not to agree to pay in robles, saying most contracts stipulated payment in euros or dollars. Wholesale gas prices in Europe have risen further recently on concerns about potential supply disruptions.

The Kremlin spokesman said, "According to the March 31 deadline set by Russia's president, we are developing all payment methods to get a simple, understandable, and feasible system for relevant European and international buyers,"

The markets and prices of more commodities like the 3D printing metal powder would be affected because of the volatile international political situations.

Metal 3D printing is a 3D printing technology that uses metal powder to directly print metal parts, also known as Selective Laser Melting (SLM).
In addition to good plasticity, 3D printed metal powders must also meet the requirements of small particle size, narrow particle size distribution, high sphericity, good fluidity and high bulk density.
The metal powders used in most 3D printers include stainless steel, aluminum alloy, cobalt-chromium alloy, copper alloy, titanium alloy and nickel alloy. Iron base alloy is the most important and largest metal material in engineering technology. It is widely used in the forming of complex structures and is widely used in aerospace, automobile, shipbuilding, machinery manufacturing and other industries.
The type of metal powder and the 3D printing process used determine the performance of the final product

Stainless steel powder
Relatively cheap metal printing materials, cost-effective, good corrosion resistance, high strength, can be quickly and efficiently small batch of complex industrial parts manufacturing.

Aluminium alloy powder
At present, aluminum alloys used in metal 3D printing mainly include AlSi12 and AlSi10Mg. Aluminosilicate 12 is a lightweight additive used to produce metal powders with good thermal properties. The combination of silicon and magnesium gives aluminum alloys higher strength and stiffness, making them suitable for thin walls and complex geometry, especially in applications with good thermal properties and low weight. Aluminum alloy is one of the most widely used non-ferrous metal structural materials in industry, its low density, high specific strength, close to or more than high quality steel, good plasticity. Research shows that aluminum alloy used for 3D printing can achieve compact parts, small structure, mechanical properties comparable to casting or even better than casting molding parts, and compared with traditional process parts, the mass can be reduced by 22%, but the cost can be reduced by 30%.

Cobalt chromium alloy powder
Due to its excellent wear resistance and corrosion resistance, metal 3D-printed cobalt-chromium alloy powder is commonly used to print all kinds of artificial joints and plastic surgery implants, and is also useful in the field of dentistry.

Copper alloy powder
With excellent thermal conductivity and electrical conductivity, copper with excellent thermal conductivity in thermal management applications can combine design degrees of freedom to produce complex internal structures and conformal cooling channels.

Titanium alloy powder
It is widely used in the aerospace field. The advantages of 3D printing can help optimize product design, such as replacing the original solid body with a complex and reasonable structure, so that the finished product has lower weight and better mechanical properties. This can not only reduce the cost, but also realize the lightweight production of each component.

Nickel alloy powder
The characteristics of oxidation and corrosion resistance of nickel alloy make it suitable for the harsh environment of high temperature and high pressure. When the nickel alloy is heated, the surface of the alloy will passivate a thick and stable oxide layer to protect the internal alloy from corrosion. Nickel alloys maintain good mechanical properties over a wide range of temperatures.

How Can Powdered Materials be Used For 3D Printing?
High energy laser beams are then controlled by 3D model data to locally melt the metal matrix while sintering the solidified powder metal material and automatically stack it in layers to generate solid parts with dense geometry.

How to Produce 3D Printing Metal Powder?
The four most widely used methods for producing metal powders are solid-state reduction, electrolysis, chemical and atomization.
Most manufacturers use electrolysis and reduction methods to produce elemental metal powders. But they are not suitable for making alloy powders.
The atomization method can be used to produce alloy powder.
Electrolysis is another method used to produce powdered metals. By choosing the right electrolyte composition, temperature, concentration, and current density, different metals can be deposited as spongy or powdered. This can then be washed, dried, reduced, annealed and crushed. This method is used to produce very high purity metal powder. Because of its high energy requirements, it is basically used for highly conductive copper powder.
Atomization method refers to the mechanical method to pulverize the molten metal into particles smaller than 150μm. According to the classification of crushing metal melt, atomization method includes the second flow atomization method, centrifugal atomization, ultrasonic atomization, vacuum atomization and so on. These atomization methods have their own characteristics and have been successfully applied in industrial production. Among them, the water-gas atomization method has the advantages of simple production equipment and process, low energy consumption, large batch, etc., and has become the main industrial production method of metal powder.

Performance Requirements of Metal Powder For 3D Printing
1. Purity

Ceramic inclusions will significantly reduce the performance of the final product, and these inclusions generally have a high melting point, difficult to sinter forming, so the powder must be free of ceramic inclusions. In addition, oxygen and nitrogen content also need to be strictly controlled. At present, the powder preparation technology used in metal 3D printing is mainly by atomization method. The powder has a large specific surface area and is easy to oxidize. In aerospace and other special applications, customers have more stringent requirements on this index, such as the oxygen content of superalloy powder is 0.006%-0.018%, titanium alloy powder oxygen content is 0.007%-0.013%, stainless steel powder oxygen content is 0.010%-0.025%.

2. Powder fluidity and loose density
The fluidity of powder directly affects the uniformity of powder spreading and the stability of powder feeding. The fluidity is related to powder morphology, particle size distribution and bulk density. The larger the powder particles are, the more regular the particle shape is, and the smaller the proportion of very fine powder in particle size composition is, the better the fluidity is. The fluidity of powder increases with the increase of relative density and particle density. In addition, the adsorption of water and gas on the particle surface reduces the fluidity of powder.

3. Powder particle size distribution
Different 3D printing equipment and forming process have different requirements for powder particle size distribution. At present, the powder particle size range commonly used in metal 3D printing is 15-53μm(fine powder) and 53-105μm(coarse powder). The selection of metal powder particle size for 3D printing is mainly divided according to metal printers with different energy sources. Printers with laser as energy source are suitable for 15-53μm powder because of its fine focal spot and easy to melt fine powder As consumable material, powder replenishment method is layer-by-layer powder; The powder-laying printer with electron beam as energy source has a slightly coarse focal spot, which is more suitable for melting coarse powder. It is mainly suitable for using 53-105μm coarse powder. For coaxial powder feeder printers, powder with particle size of 105-150μm can be used as consumables.

4. Powder morphology
The morphology of powder is closely related to the preparation method of powder. Generally, when metal gas or molten liquid is transformed into powder, the shape of powder particles tends to be spherical, and when metal solid is transformed into powder, the powder particles are mostly irregular shape, and most of the powder prepared by aqueous solution electrolysis is dendritic. Generally speaking, the higher the sphericity, the better the fluidity of the powder particles.3D printing of metal powder requires sphericity above 98%, which makes it easier to lay and feed powder during printing.

3D Printing Metal Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing metal powder, please feel free to contact us and send an inquiry. ([email protected])

The COVID-19 pandemic has affected economies and chemical companies in many countries around the world. Measures such as extending holidays and resuming work were taken to control the development of the epidemic, and the normal operation of some chemical enterprises was also affected to some extent.

We provides high quality 3D printing metal powder with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide 3D printing metal powder with competitive price.” said Olina, the sales manager.

Chemical 3D printing metal powder, feel free to contact us.

Inquery us

NEXT NEWS

Our Latest News

Global boron carbide powder market trend 2022-2030 What is Boron Carbide B4C? by Newsinwin-style

Boron carbide, also known as black diamond, is an inorganic substance with the chemical formula B4C. Hard black lustrous crystal.…

Global natural graphite market trend 2024-2027 Do you know some knowledge about natural graphite? by Newsinwin-style

Natural graphite is naturally occurring graphite. Natural graphite is an important industrial mineral with applications in almost every aspect of manufacturing, including electronics, atomic energy, hot metal working, friction, coatings, aerospace, p…

Global tungsten powder market trend 2024-2028 What are the Strongest Metals in the world? by Newsinwin-style

Oil futures tumbled more than $5 a barrel on news that the Biden administration is considering releasing about 1 million barrels a day from the U.S. Strategic Petroleum Reserve (SPR) for several months to cool surging crude prices.Brent crude futures…