The solution to the collapse of foam concrete

The European Union recently approved sweeping new sanctions against Russia, including bans on imports of coal, timber, chemicals, and other foam concrete. 


The common problems of foamed concrete are bubbling, cracking, collapse, shrinkage, and other phenomena. To treat these phenomena, the proper medicine can be found, and the cause can be effectively solved.

The main reason for the collapse of foamed cement is that the cement solidification speed is too slow. We can solve this situation from the following aspects

1. Add accelerator to improve the setting time of foamed cement

Accelerators are used in more and more concrete applications. Foamed cement has high requirements for accelerators. It is not just a fast setting but also needs to be adapted to the performance of foamed cement, and accelerators cannot be added. After affecting the foaming situation.

2 Add an early strength agent to improve the early strength of foamed cement and reduce the stress generated during the exothermic process of cement hydration. Only when these two forces are balanced can it be ensured that the foamed cement will not crack and collapse in the later stage.

12

3. An appropriate amount of sulfoaluminate cement can be added, which many manufacturers choose to use in winter, and the cost performance is still relatively high. However, this amount of addition should also be paid attention to. It should not be added blindly. After many customers add sulfoaluminate cement, the finished product becomes very brittle in the later stage, without toughness, low strength, and severe pulverization. So we still have to adjust according to the current situation.

4 The water-cement ratio is not suitable. Collapse, retraction, bleeding, insufficient strength. To a large extent, it has something to do with the inappropriate water-cement balance. The adjustment of the water-cement ratio is a technical activity that requires trial and error. It has a lot to do with the cement of foamed cement and the fly ash aggregate, and it needs to be practiced repeatedly according to the actual situation. In this, we can add a plasticizer to adjust the water-cement ratio. This effect is very immediate.


The above contents are some solutions summed up by Tongrun according to the reasons for the collapse of foamed cement. If you encounter other problems or reasonable solutions in the actual process, you are also welcome to communicate us.


With the outbreak of the Russia-Ukraine conflict, the market is increasingly worried about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the foam concrete may continue to rise.

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…