Germanium Telluride GeTe Powder CAS 12025-39-7

About Germanium Telluride GeTe Powder:
Germanium telluride(GeTe) is a compound of germanium and tellurium, which is a component of chalcogenide glass. It has semimetallic conductivity and ferroelectric properties. There are three main types of germanium telluride crystal: α(rhomboid) and γ(orthogonal) at room temperature and β(cubic, halite) at high temperature. At the ferroelectric Curie temperature of about 670 K, the main phase of pure GeTe is the α phase. Doped germanium telluride is a low-temperature superconductor.

The germanium telluride crystal is a periodic table WTH group element compound semiconductor. Ionic crystals.Trigonometric system face center structure, b. 19G1} lining.Melting point 724 C'.It is a direct bandgap semiconductor with a room temperature forbidden bandwidth of 0.23eV. It is a narrow bandgap semiconductor with a hole mobility of 7x10-3mZilv "S)} degree prepared by melting and recombination method. Used as infrared light emission and detection materials. RBOSCHCO is a trusted global Germanium Telluride GeTe Powder supplier. Feel free to send an inquiry about the latest price of Germanium Telluride at any time.

Product Performance of Germanium Telluride GeTe Powder :

Germanium telluride is a chemical with the chemical formula GeTe. It is quite stable in air, insoluble in dilute acid and potassium cyanide solutions other than water and nitric acid.


Technical Parameter of Germanium Telluride GeTe Powder :

Product NameMFPurityParticle SizeMolecular WeightDensityColor
Germanium TellurideGeTe99.99%-100 mesh200.246.14 g/cm3Gray Black

 

How is Germanium Telluride GeTe Powder Produced?
The preparation method of germanium telluride consists of the following steps:
(1) Weigh a certain amount of germanium telluride powder into the organic solvent and mix it evenly. The ratio of the mass fraction of germanium telluride powder to the volume fraction of the organic solvent is (2100):(5100). The unit of the mass fraction is Mg and the unit of volume fraction is mL.

(2) Put the evenly mixed solution in Step (1) into the cell crusher for ultrasonic treatment;

(3) The ultrasonic germanium telluride dispersion was centrifuged, and the grayish-black supernatant was taken. The two-dimensional material germanium telluride was dispersed in the supernatant.
 
Applications of Germanium Telluride GeTe Powder:
Germanium telluride is a thermoelectric material.
Germanium telluride is used in thermoelectric refrigeration.
Germanium telluride is also used in infrared detection equipment and semiconductors.
GeTe is already widely used in non-volatile optical data storage, such as CD, DVD and Blu-ray, and may replace dynamic and flash random access memory. In 1987, Yamada et al. studied the phase transformation properties of GeTe and Sb2Te3 used in optical storage. The shorter crystallization time, circularity and high optical contrast make these materials a better choice than Te81Ge15Sb2S2, which has a slower transition time

The high resistivity contrast between amorphous and crystalline states and the ability to repeatedly reverse transitions make it a good candidate for RF switches. The radiofrequency requires the deposition of a thin layer of GeTe film on the surface of the substrate. Seed layer structure, precursor composition, deposition temperature, pressure, gas flow rate, precursor bubbling temperature and substrate all have an influence on membrane performance.

Storage Condition of Germanium Telluride GeTe Powder :
The damp reunion will affect GeTe powder dispersion performance and using effects, therefore, germanium telluride GeTe powder should be sealed in vacuum packing and stored in the cool and dry room, the germanium telluride can not be exposure to air. In addition, the GeTe powder should be avoided under stress.

Packing & Shipping of Germanium Telluride GeTe Powder :
We have many different kinds of packing which depend on the germanium telluride GeTe powder quantity.
Germanium telluride GeTe powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Germanium telluride GeTe powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.





 

Germanium Telluride Properties

Other Namesgermanium monotelluride, germanium(II) telluride,
germanium(2+) telluride, GeTe powder
CAS No.12025-39-7
Compound FormulaGeTe
Molecular Weight200.23
AppearanceGray Black Powder
Melting Point725
Boiling PointN/A
Density6.14 g/cm3
Solubility in H2ON/A
Exact Mass203.827 g/mol
  
  

Germanium Telluride Health & Safety Information

Signal WordN/A
Hazard StatementsH302
Hazard CodesXn
Risk CodesR22
Safety StatementsN/A
Transport InformationNONH for all modes of transport

Inquery us

NEXT Products

Our Latest Products

Zirconium Oxide ZrO2 powder CAS 1314-23-4

Item No.: TR-ZrO2 Zirconium dioxide (chemical formula: ZrO2) is the main oxide of zirconium. It is usually a white odorless and odorless powder, which is difficult to dissolve in water, hydrochloric acid and dilute sulfuric acid.Purity: 99.5…

Cuprous Oxide Cu2O powder CAS 1317-39-1

Item No.: TR-Cu2O Cuprous oxide is a bright red powder, almost insoluble in water, disproportionated into divalent copper and copper in acidic solution, and gradually oxidized into black copper oxide in moist air.Purity: 99%Particle size: 50…

Spherical Aluminum Oxide Al2O3 Powder CAS 1344-28-1

Item No.: TR-S-Al2O3 Spherical alumina has the characteristics of high sphericity and high content of α-phase alumina, and it shows superior performance when used as a filler for rubber, plastics and ceramic raw materials.Purity: 99.9%Shape:…