Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties

Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for HPMC.

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceeds 40000 MPa•s, the water retention increases limited with the increase of viscosity. The higher the viscosity, the larger the molecular weight of HPMC, and the corresponding decrease in solubility. It will not improve the water retention of mortar, but it will have a negative impact on strength and workability. Comprehensive consideration, it is more appropriate to use cellulose ether with a viscosity of 40000 MPa•s in the cement mortar.


As the HPMC particles gradually become finer, the water retention of the mortar is also improved to a certain extent. Fineness affects the solubility of HPMC. Coarse HPMC dissolves very slowly in water and should not be used in dry mix mortars. In dry-mix mortar, HPMC is dispersed between aggregates, fine fillers and cementitious materials such as cement, and only a fine enough powder can prevent it from caking when mixed with water. When HPMC is added with water to dissolve the agglomerates, it is difficult to re-disperse and dissolve. HPMC with coarse particle size is not only wasteful, but also reduces the local strength of the mortar. When such dry-mixed mortar is used in large-scale construction, the curing speed of the local mortar may be significantly reduced, which may cause uneven hydration of the cementitious material. of cracking. For mechanically constructed spray mortars, due to the shorter mixing time, the requirements for the fineness of HPMC are higher. Therefore, after comprehensive consideration, the particle size of cellulose ether used for cement mortar should be less than 80 μm.


It can be seen that HPMC is a high-efficiency water-retaining agent for dry-mixed mortar, which reduces the bleeding rate and stratification of the mortar, and improves the cohesion and sag resistance of the mortar. Although HPMC slightly reduces the flexural and compressive strength of mortar, it can significantly improve the tensile strength and bond strength of mortar. In addition, HPMC can effectively inhibit the formation of mortar plastic cracks and reduce the mortar plastic cracking index. The water retention of mortar increases with the increase of HPMC viscosity, and when the viscosity exceeds 40000MPa•s, the water retention does not increase significantly. The fineness of HPMC also has a certain influence on the water retention rate of the mortar. When the particles are finer, the water retention rate of the mortar increases. The particle size of HPMC usually used for cement mortar should be less than 80μm.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality HPMC, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com




Commodities such as crude oil, wheat, cotton, and nickel have rallied since Russia's "special military operations" began in late February. On the last trading day of this quarter, commodities were on track for their biggest gain since 1990. For this reason, it is expected that the price of the HPMC will continue to increase.

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…