High Purity Molybdenum Carbide Mo2C Powder CAS 12069-89-5, 99%

Molybdenum Carbide is a chemical compound with the formula Mo2C. It is known for its high melting point, hardness, thermal stability, and mechanical stability. Particle Size: 325mesh
Purity: 99%

Molybdenum carbide powder
Molecular formula of molybdenum carbide It is Mo2C , Molybdenum carbide molecular Weight Its carbon content is 5.89%. The optimum value is 203.88. It's a gray-colored metal powder that has a tightly packed hexagonal crystallastic lattice. Molybdenum carbide The density Is 9.18g/cm Molybdenum carbide melting point The number 2690. This new functional material has an excellent melting point, hardness, thermal and mechanical stability and corrosion resistance. It is widely used to resist high temperatures, chemical corrosion and wear.
Mo carbide Has a hexagonal crystal arrangement, a= 0.30029nm; c= 0.472895nm. Micro Vickers hardness (load 50g), 1950kg/mm2 (compared 2080kg for WC). (mm2 is harder) The melting point for Molybdenum Carbide Mo2C Powder is 2687. If you are interested in purchasing Molybdenum Carbide Mo2C Pulver bulk, please send us an inquiry.

Molybdenum Carbide Mo2C Pulver:
Molybdenum carbid CAS 12069-95-8, is a grey hexagonal crystal. The characteristics include a high melting temperature and hardness as well as good thermal and mechanical stability. It is also resistant to corrosion. 2692 degC is the melting point. It is not soluble in water or alkaline liquids, but it can be slightly soluble in hydrofluoric acid, sulfuric and nitric acids.
Formula molecular: Mo2C
CAS Code: 12069-95-8
Property and appearance of:gray-black metal powder
Melting point: 2690
Density: 5.89g/cm3

Technical Parameter MolybdenumCarbide Mo2C Pulp :

Chemical Composition Mo+C C All C S O Fe
Test result (%) 99 11.3 0.2 0.02 0.4 0.12

It is simple. Molybdenum Carbide Mo2C Mo Powder produced?
1. The molybdenum-carbide powder is generally made using the following methods: molybdenum-carbon direct chemical method; metal oxide and reduction-chemical method; vapor deposition technique and self-propagating, high-frequency vacuum furnace for sintering.

2. After they have thoroughly mixed the molybdenum and carbon black, they are then ground using a ballmill and pressed into form. A hydrogen gas stream is used to calcine the product at 1350-1500degC. The calcined product then is cool, crushed and ground. Molybdenum trioxide and molybdenum dioxide can be used in place of the molybdenum reduction method.

3. The use of an auxiliary bath for metal.
Use cobalt to make a metal bath. Heat it using a Taman furnace with hydrogen stream at 1800°C. After cooling, heat in a pure graphitecrucible at 1800°C for 1h. Once it has cooled, chill it at 1800°C. For 23 hours. When it cools to room temperature, melt the molecular weight of Mo2C.

4. Produced through the carbonization metallic molybdenum.
Molybdenum oxide MoO3 is then hydrogenated and reduced into molybdenum. Next, the mixture of molybdenum trioxide MoO3 and carbon black is dried-mixed for 10 hours in a ballmill. Finally, it is molded under 1t/cm2 pressure. Place the pressure-treated material block in a graphite crucible. Then heat it in a hydrogen stream using pure hydrogen at a temperature of 1400-1500 with an induction heating furnace, or Taman furnace. Keep this temperature constant for approximately 1h. Mo2C can be made by carbonizing molybdenum.

5. Utilizing synthetic methods
The molybdenum and carbon black are mixed together in a bowl. They then grind the mixture for an hour using a ballmill. Once it has cooled, it is pressurized into granules, which can be used to heat up the product. The product is obtained by hydrogen gas flow calcining for one hour at 1350-1500°C. Next, the product must be cooled, then pulverized, and finally ground in a ball mill. You can use molybdenum oxide or molybdenum bioxide instead of molybdenum pulverized powder to reduce the molybdenum carbonide.

Applicaciones Molybdenum Carbide Mo2C Pulp:
Molybdenum carbide is an innovative functional material that has high melting points, hardness, excellent anti-corrosion and other properties. This material has been extensively used in a variety of high temperature, chemical and abrasion corrosion areas. The electronic structure of the noble metal and its catalytic properties are similar.

1. Because of its unique electronic structure and catalytic properties, molybdenum caride can be used widely as a catalyst in reactions involving hydrogens such as hydrodesulfurization or denitrification.
2. Molybdenum carbide is an important component of molybdenum-molybdenum carbide hard coatings and other cermet coatings, and can also be used alone as a wear-resistant and wear-resistant coating;
2. Molybdenum-carbide is commonly used in hydrogen related reactions like alkanes.
3. To make engineering ceramics, chromium free special alloys or molybdenum caride, you can use Molybdenum Carbide.
4. Molybdenum carbid is used in super-hard material, wear resistance material, heating element material, high-temperature structural materials and as a tool material.
5. To make wear-resistant films or semiconductor films, Molybdenum Carbide is used.
6. For chromium-free engineering ceramics, molybdenum caride can be used.

Molybdenum Carbide Mo2C Pulver Storage :
Molybdenum Carbide Mo2C Dust should not be exposed to the air. Damp reunion can affect Mo2C powder's dispersion performance. Additionally, Mo2C Powder should not be exposed to stress.

Molybdenum Carbide Mo2C Pulver Packing & Shipping :
We offer many packing options that are dependent on the Molybdenum-Carbide Mo2C Powder amount.
Molybdenum Carbide Mo2C Mo2C Powder packaging: vacuum packing 100g, 500g and 1kg/bag at 25kg/barrel. Or as you request
Molybdenum Carbide Mo2C Mo2C Powder Shipping: Shipments can be made by sea or air as soon as the payment is received.


Wgraj advanced materials Nano Technology Co. Ltd. (Wgraj), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years' experience providing high-quality chemicals.
Send us an enquiry if you're looking for mo carbide powder of high quality. ( brad@ihpa.net )

Wgraj advanced materials Nano Technology Co. Ltd. (Wgraj), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience providing high-quality chemicals.
Send us an enquiry if you're looking for Mo2C powder of high quality. ( brad@ihpa.net )

Molybdenum Carbide Properties

Other Titles Mo2C, dimolybdenum caride
12069-89-5
Compound Formula Mo2C
Molecular Weight 203.89
Appearance Gray Powder
Melting Point 2690
Boiling Point N/A
Density 9.18 g/cm3
Solubility of H2O N/A
Exact N/A

MolybdenumCarbide Safety and Health Information

Signal word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
Transport Information N/A

Inquiry us

0086-0379-64280201 brad@ihpa.net skype whatsapp