Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. This is done by sintering. Particle Size: -325mesh
Purity: 99%

Zirconium Carbide Pulver:
Zirconium carbide ZrC It is used commercially to cut tooltips. It is often sintered. Zirconium carbide It is hard. Zirconium carbide melting point 3504degC Zirconium carbide Point boiling Temperature is 5100degC The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700 degrees Celsius in the air and produces zirconia. You should not mix it with water.

ZrC powder It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity is resistivity at 43mO*cm. These properties are very similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) and HfC (12.67g/cm3). ZrC appears to be suitable in reentry, rocket/hyperjet and supersonic aircraft where high density is a critical requirement.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free of carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the latest information, send us an inquiry Zirconium carbide price Please fill out the form below if you wish to buy Zirconium Carbide ZrC Powder In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:

Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, fine particle size, uniform distribution and high specific surface area. High melting point, high strength, corrosion resistant high-temperature material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.

Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:

Product name	MF	Purity	Particle Size	Crystal Form	SSA	The color of the sky
Zirconium Carbide Nanoparticles	ZrC	99%	20nm	Cubic	11m2/g	Black

It is simple. Zirconium Carbide ZrC Powder produced?
Zirconium carbonide can be made in many different ways. A carbothermal reaction is one way to make zirconium carbide. This produces powder. By sintering ZrC at temperatures higher than 2000°C, dense ZrC is possible. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Chemical vapor deposit is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800°C. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrCZrB2 is the preferred composite material. These composite materials are capable of working at temperatures above 1800°C. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.

Applicaciones Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used in the manufacture of zirconium tetrachloride (Zirconium Tetrachloride) and other promising ceramic materials. Zirconium carbonide can be used incandescently. It's mainly used now as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has good high-temperature resistance to oxidation, strength, hardness and high thermal conductivity. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
Coating material
As refractory coats in nuclear reactors, ZrC is not used. It is easier to be damaged by radiation due to its lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. Superheated chemical vapor deposition (in a fluidized-bed reactor) is the most common method of depositing coatings. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
Concrete tools
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-common high-temperature material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Nanostructured parts
Zirconium carbide nanoparticles may be used in the aerospace, chemical and metallurgical industries. The textile industry can use it to produce nylon, fiber and carbonide thermostatic textiles. They are also used to create composites for metal and ceramic substrates.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
Many types of packing are available depending on the quantity of zirconium nanoparticles.
Zirconium carbide nanoparticles packing: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Shipment of Zirconium Carbide Nanoparticles You can have your order shipped by express, air or sea within 24 hours of receipt.


Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global chemical material supplier and manufacturer. With over 12-years of experience, Whatsontianjin has been providing high-quality chemicals, Nanomaterials, such as boride, nitride, graphite, sulfide, 3D printing powders, and others.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. ( brad@ihpa.net )

Zirconium Carbide Properties
Other Titles	zirconium(IV) carbide, methylidynezirconium, ZrC powder
	12070-14-3
Compound Formula	ZrC
Molecular Weight	103.23
Appearance	Gray Powder
Melting Point	3532
Boiling Point	5100
Density	6.73 g/cm3
Solubility of H2O	N/A
Exact Mass	102.912529
Zirconium Carbide Safety & Health Information
Signal word	Danger
Hazard Statements	H228-H302-H312-H332
Hazard Codes	F, Xn
Risk Codes	11-20/21/22
Safety statements	16-27-33-36/37/39
Transport Information	UN 3178 4.1/PG2

Inquiry us