High Quality EBS Ethylene Bis Stearamide Emulsion

EBS Ethylene Bis Stearamide Emulsion in white is a nontoxic, nonpolluting, environmentally friendly product. This product can be used to make inks, paints, and leather coatings. Particle Size: D50: =2mm

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Products property This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to disperse into water. It has a low viscosity and ultra-fine texture.

EBS Ethylene bis Stearamide Emulsion :
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has wettability in water of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and is highly compatible with most thermoset thermoplastics. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide a plastic lubricant is new and widely used in PVC products. The stearate has a better internal lubrication and external lubrication that lubricants, like polyethylene wax. Plastic molding is improved by the fluidity of the fused plastic. This allows for increased yields and lower energy consumption. Additionally, it has excellent smoothness and surface finish. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.

Ethylene Bis stearamide emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.

It is simple. EBS Ethylene Bis Stearamide produced?
You can divide EBS's synthesis technique into 4 routes.
Combining stearic acid and amine compounds
Reacting with an amine compound to the stearate react is called "The stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, the process can consume a lot of energy and is lengthy.

Use of EBS Ethylene Bis Stearamide Emulsion :
EBS Ethylene Bis Stearamide Emulsion White Emulsion. It is an environmentally-friendly, safe, non-polluting and non-hazardous emulsion. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Nylon, and PP. Amino plastic, Phenolic resin, and others have excellent finishes.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers and polychloroprene (SBR), add 1 to 3 percent EBS to their emulsion. They have excellent anti-sticking and antiblocking abilities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This gives them a higher surface gloss.
3. Chemical fiber
EBS increases the heat resistance, fluidity, and antistatic properties of polyamide, polyester, and other fibers.
4. Type
Casting sand can be added to a phenol resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
Based on the quantity of the pigment, the added amount is between 0.5 and 5%.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings and inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
Lubricants and corrosion inhibitors during the metal wire. Potting materials for electric components.
Below the papermaking agent, and above the paper coating components
You can dye textile dyeing as both a dyeing engineer defoamer or a permanent water-drawing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather resistance.

Technical Information of Ethylene bis Stearamide Emulsion

Product EB-20
Solid content. % 20+-2
Cps, viscosity <=100
Particle Size D50 <=2um
PH 7-9

Shipping and Packing of Ethylene bis stearamide emulsion
We offer many packing options, which depend on the Ethylene Bis Stearamide Emulsion amount.
Ethylene Bis Stearamide Emulsion packing: 25kg/barrel
Ethylene Bis Stearamide Emulsion shipping: Could be sent by sea, air, or express once payment receipt is received.

EBS Ethylene Bis Stearamide Emulsion Properties

Additional Names 1,2-Bis(stearoylamino) ethane N,N'-1,2, Ethanediylbisoctadecanamide,
N,N'-Ethylenedi(stearamide), Ethylene distearylamide
N/A
Compound Formula C38H76N2O2
Molecular Weight 593.038 g*mol-1
Appearance Crystals of white, waxy color
Melting Point 144 to146°C
Solubility In Water N/A
Density N/A
Purity N/A
Pearticle Size D50: <=2mm
Boling point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact N/A
Monoisotopic N/A

EBS Ethylene Bis Stearamide Emulsion Safety & Health Information

Safety Notice Alert
Hazard Statements H315, H319, H335
Flashing Point 280 degC
Hazard Codes T
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Products

High Purity Silicon Carbide Nannoparticles Nano SiC Powder CAS 409-21-2, 99%

These nanoparticles of silicon carbide are high in purity, have small particles sizes and an extremely specific surface area. It is very thermally conductive and resistant to oxidation even at extreme temperatures. Purity: 99%Particle size: 60nm and…

High Purity Silicon Nannoparticles Nano Si Powder CAS 7440-21-3, 99%

These silicon nanoparticles have a large surface area and high surface activity. They also possess low bulk density. The new optoelectronic material is made up of a large gap energy semiconductor. Purity: 99%Particle Sizes: 50nm,100nm About Silicon…

High Purity Cobalt Phosphide Co2P Powder CAS 12134-02-0, 99.99%

Cobalt Phosphide (also known as Co2P) is gray powder. It has a melting point of 1386. It's soluble in aqua regia (nitric acid) but not water. Purity: 99.99%Particle Size: 60 mesh About Cobalt Phosphide Co2P Powder : Cobalt Phosphide, a gray…