High Purity Tin Telluride SnTe Powder Cas 12040-02-7,99.99%

Tin Telluride (IV-VII compound semiconductor material) is made of IVA element Sn, and VIA component TE. SnTe is its molecular formula. Particle Size: -80mesh and -100mesh
Purity: 99.99%

about Tin telluride SNTE
Tin Telluride (IV-VI) compound semiconductor material is made of IVA element Sn, VIA element T. The molecular formula of SNTE. It is an asynchronous transmitting type and the banned bandwidth is 0.60eV.

Tin Telluride can be described as a semiconductor substance. A sodium chloride structure and ionic cristals have a covalent bond component. Density 6.48g / cm3, melting 780 degrees Celsius. The material is made using an epitaxial and straight pull methods.

Tin Telluride is often alloyed with lead tiny lisuride to create the infrared detection material. Tin Telluride forms an external semiconductor, the p type (external semiconductor), due to the presence of tin in its air. This superconductor is low-temperature.

Tin Telluride can be found in all three phases of the crystal. Low temperatures result in a concentration of less than 1.5 x 10-20 cm-3 for the aperture carrier. Also known as the "a-SNET" phase, it is found in the diamond stage. The NaCl samples are labelled b-SNE. Tin TELLURIDE, which is found at room temperature and atmospheric press, can be detected in NaCl samples. Although the bSNTE is transformed to gSNTE and orthogonal phases, it also forms part of the spatial group PNMA. This phase change causes an 11% rise in the resistance and 360% increase in the strength of the g-SNET. Teti, a thermoelectric substance, is also known as Teti. Research suggests that the n-type performance might be very good. If you are interested in buying Tin telluride, SnTe powder wholesale, please send us an inquiry.

Tin telluride SnTe powder features :

Keep the mixture at room temperature and low pressure. Use caution around open flames, heat, and light. Use semiconductor-based water to dissolve.

Description of Tin telluride, SnTe powder:

Product
Purity
APS
The color of the sky
The Shape

Density (g/mL 25, 25)

Melting Point

Crystal Structure

Tr-SnTe

99.99%-99.9999%
100mesh
Gray cubic crystal
powder,granule
Block
6.5
790degC
Cubic

You can order different products depending on your requirements.

How does Tin telluride snTe powder manufactured?
1. The high-purity, pure ruthenium, and the high-purity of tin were weighed. After placing the ampoule into a furnace to warm (about 50°C / h), heat 72 hrs, and then turn off furnace. Ampule will now be slowly chilled, and coldened until room temperature.
2. The high-purity, pure tin, and the ruthenium as per the chemical measurements ratio are weighed. Seal the container under high vacuum (10-5 Pa) Place the ampoule into a cold oven, quickly heat (about 200 degrees C/h of 810 degree C), and let cool for about 15 hours.
3. As the electrolytic cells, use 1 L of the round-neck three-neck flask. The cathode measures 5 mm diameter by 7cm length 7 cm purity. 99.99% of semiconductor material level. The anode is a cylindrical high purity bottle of tin. You should seal the glass and metal. This port allows you to connect and add the mechanical vacuum pump. The magnet stirrer is used to stir the botulfluoroethylene during electrolysis. An NH4AC–HAC buffer solution is used. To bring the pH up to 4.5, you can add 500 ml (1 mol / L) ammonia. To start electrolysis, you must place the flask of electrode in the vacuum. After 30 minutes, adjust the magnetic force and stir the mixture for 30 minutes. In the anode, SnTe is precipitated in Sn2 + solution.
4. You can also add the electrolyte to the anode. The metal salt solution (such a chloride) can be droppedwise and is used in 101.325kPa pure Argon with Platinum.
The electrolyte's precipitate is heated in an argon environment to encourage precipitation. You must not let crystallization be made in the air. After crystallization, remove it from air. The crystals can then be washed, centrifuged, dried at 120 degrees C, for 4 hours, and then dried with an argon flow.

Tin Telluride SnTe Gold:
Use high-purity inorganics in electronics for display, screen, solar cell and functional ceramics as well as batteries, light bulbs, thin film growth, catalyst, and others.

Packing & Shipping Tin telluride SnTe powder -
We offer many packing options that are dependent on Tin telluride quantity.
Tin telluride powder packaging: vacuum packaging, 100g to 500g or 1kg/bag for 25kg/barrel or upon your request
Tin telluride and SnTe powder shipping can be sent by sea, air or express once the payment has been received.

Tin Telluride Tin Powder Properties

Some Other Names Tin Telluride, SnTe Powder, Cas 12040-02-7, Tellanylidenestannane,
Tellanylidenetin, Tin(II) Telluride
12040-02-7
Compound Formula SnTe
Molecular Weight 246.31
Appearance Gray crystalline solid
Melting Point 790 degC (1454 degF)
Solubility In Water N/A
Density 6500 kg/m3
Purity 99.99%
Particle Size -80mesh, -100mesh
Bold point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young’s Module N/A
Exact 251.824 g/mol
Monoisotopic 253.839722 D

Tin Telluride Tin Powder Health & Safety Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Products

High Purity Zirconium Carbide Nannoparticles Nano ZrC Powder CAS 12070-14-3, 99%

Zirconium carbide nanoparticles can be described as a material of high hardness with excellent high-temperature resistance. It's used in rocket engines as a propellant material. Purity: 99%Particle Size 20nm About Nanoparticles Nano ZrC powder o…

High Purity Silicon Carbide Nannoparticles Nano SiC Powder CAS 409-21-2, 99%

These nanoparticles of silicon carbide are high in purity, have small particles sizes and an extremely specific surface area. It is very thermally conductive and resistant to oxidation even at extreme temperatures. Purity: 99%Particle size: 60nm and…

High Purity Silicon Nannoparticles Nano Si Powder CAS 7440-21-3, 99%

These silicon nanoparticles have a large surface area and high surface activity. They also possess low bulk density. The new optoelectronic material is made up of a large gap energy semiconductor. Purity: 99%Particle Sizes: 50nm,100nm About Silicon…